Pos: Sync Error - LoadModuleLicense fails. (Result = RemoteUSBKeyNotFoundError)

Question : When I do POS Sync, system prompt error message ‘LoadModuleLicense fails. (Result = RemoteUSBKeyNotFoundError)’. Why?

Possible Reason :

IP address set at USB Key Setting (in License Control) is different from server IP address. This may happen due to server is connected to Wi-Fi internet connection and its IP address is not stable.

Solution :

Use fixed server IP address.

Go to Control Panel\All Control Panel Items\Network and Sharing Center

Click on the Wi-Fi name.

The following screen will prompt. Click on Properties.

Select Internet Protocol Version 4 (TCP/IPv4) and click on Properties.

Select option Use the following IP address and you may fix your IP address here.

Make sure IP address at USB Key Setting is the same as the IP address that you fixed.

The speed sync should be synced successfully after above action is performed.

Note : Please seek assistance from your software dealer if the problem persists after performing the steps as above.

By : Aisyah 180820, Lay Swan 180823, P180823

Go to menu

AutoCount Accounting 2.0 & 2.1 AutoCount Accounting 2.0 What's New AutoCount Accounting 2.0 Help File AutoCount Accounting 2.0 FAQ (Application) AutoCount Accounting 2.0 FAQ (Troubleshoot) AutoCount Accounting 2.0 Others AutoCount Accounting 2.0 Release Note AutoCount Accounting 2.1 Release Note

AutoCount Accounting 1.8 / 1.9 AutoCount Accounting 1.8 FAQ (Application) AutoCount Accounting 1.8 FAQ (Troubleshoot) AutoCount Accounting 1.8 / 1.9 Release Note

AutoCount Payroll

AutoCount POS

AutoCount On The Go

AutoCount Accounting Plug-In Documentations