Troubleshooting: Stock Adjustment not reflect to stock card report

Question : I’ve created a stock adjustment to adjust the balance cost, but why it was not reflected on the stock card report?

Version : 1.8 / 1.9 / 2.0

Stk adj1.png

Stk adj2.png

Possible Reason :

The stock adjustment was entered incorrectly.

Solution :

1. Open and check on the stock adjustment, the figure wrongly keyed in at column sub total.

Stk adj3.png

2. Edit the Stock Adjustment, key in the figure to adjust at Unit Cost and click on Save.

Stk adj4.png

3. Inquiry the stock card report and now the balance cost is adjusted.

Stk adj5.png

Note : The stock adjustment to adjust the cost value but not affecting the quantity only applicable for costing method Weighted Average.

By : Azirah 180815, Lay Swan 180914, P180919

Go to menu

  AutoCount Accounting 2.0

  AutoCount Accounting 1.8 / 1.9
  AutoCount Payroll
  AutoCount POS

  AutoCount On The Go
  AutoCount Accounting Plug-In Documentations