Question : I’ve created a stock adjustment to adjust the balance cost, but why it was not reflected on the stock card report?
Version : 1.8 / 1.9 / 2.0
Possible Reason :
The stock adjustment was entered incorrectly.
1. Open and check on the stock adjustment, the figure wrongly keyed in at column sub total.
2. Edit the Stock Adjustment, key in the figure to adjust at Unit Cost and click on Save.
3. Inquiry the stock card report and now the balance cost is adjusted.
Note : The stock adjustment to adjust the cost value but not affecting the quantity only applicable for costing method Weighted Average.
By : Azirah 180815, Lay Swan 180914, P180919
|AutoCount Accounting 2.0 & 2.1
|AutoCount Accounting 1.8 / 1.9
|AutoCount On The Go
|AutoCount Accounting Plug-In Documentations